Welcome divider

Shenzhen LANKEL: Focused on Automatic Detection and Automatic Control Systems for the Metallurgical Industry

LK-BP-MT
Electromagnetic Molten Steel Level Gauge

Electromagnetic induction principle, unaffected by mould powder or steel grade, for accurate molten steel level detectionNo radiation hazard; heavy-duty steel shell resists overflow, temperature drift and interference for a long service lifeNo manipulator required — bolted directly onto the mould top for easy installation and maintenance

Stable and reliable molten steel level detection Easy on-site integration and maintenance Intelligent system, simplified commissioning
LK-EM-PT-MT-02 Electromagnetic Molten Steel Level Gauge
Product Features
⊙

Spherical Level Measurement

A wide-field excitation electromagnetic field samples the mould level over an approx. 600 mm spherical volume, so the output signal is insensitive to local meniscus variations.

≣

Immune to Steel Grade

Detection characteristics are independent of steel grade; the true molten steel level is unaffected by slab width or mould powder layer thickness.

⏱

25 ms Fast Response

High-speed induction by the eddy-current excitation field; signal response time ≤ 25 ms for real-time level tracking.

⊡

PLC Remote Zero Calibration

The level zero point can be automatically initialised by the PLC before casting; the calibration routine supports remote control.

⛨

Resists Molten Steel Overflow

Heavy-duty stainless steel body + effective cooling water circuit + sensor cover design; short-term overflow causes no damage or explosion.

⇄

Rich Interfaces

4–20 mA analogue current output, industrial Ethernet and 3 I/O channels for seamless integration with mainstream PLC systems.

Electromagnetic Molten Steel Level Gauge

Complete Caster Mould Level Measurement Solution

Comprising an electromagnetic level sensor, shielded cable, junction box and electromagnetic molten steel level gauge — covering the whole process of measurement, transmission and processing.

①
DETECTOR · LEVEL GAUGE

LK-EM-PT-MT-02 Electromagnetic Molten Steel Level Gauge

Wall-mounted, with self-diagnosis and remote zero calibration. One 4–20 mA analogue output, industrial Ethernet interface and 3 I/O channels for caster automation control.

②
SENSOR · LEVEL SENSOR

LK-EM-PT-SS-01 Electromagnetic Level Sensor

Solid heat-resistant stainless steel block with built-in excitation coil, sensing coil, thermal resistor and internal cooling circuit. Mounted on the mould top copper plate, symmetrically distributed on both sides of the central axis.

③
CABLE · SHIELDED CABLE

High-Temperature Shielded Cable (≤15 m)

Heat-resistant protective hose sheath with heavy-duty connectors. Dry air or nitrogen can be purged through to prevent moisture ingress; max. ambient temperature 180 ℃.

④
JUNCTION BOX · JUNCTION BOX

Junction Box

The cables from both sensors are connected to the junction box, which links to the electromagnetic molten steel level gauge via an intermediate cable.

Technical Specifications

Measurement

Typical Measuring Range20–160 mm below mould top
Nominal Range (recommended)60–100 mm
Minimum Indicated Level250 mm
Ramp Setting Example4 mA = 160 mm, 20 mA = 0 mm
Resolution≤ 0.2 mm
Linearity±3% of measuring range
Long-term Stability (8 h)±5 mm (@80 mm level)
Short-term Fluctuation (accuracy)< ±1% (@80 mm)
Response Time≤ 25 ms

Cooling & Air Supply

Cooling Water Flow20–25 L/min
Inlet Water Temperature10–45 ℃
Water Temp. Fluctuation during Casting≤ 5 ℃
Inlet Pressure≤ 500 kPa
Pressure Fluctuation during Casting< 10%
Pressure Drop (@25 L/min)approx. 60 kPa
Pipe FittingR 1/2"
Metal Particle Content< 0.5 mg/L
Low Flow Alarm15 L/min (mandatory)
Compressed AirNitrogen / dry air 0.3 bar

Detector

Analogue Output4–20 mA (max. 500 Ω)
Digital OutputIndustrial Ethernet
I/O Interface3 channels (PLC / terminal)
Power SupplyAC 230 V / 50 Hz / 150 VA
Overvoltage CategoryII (IEC 664)
FusesF 2A/L 250V + F3 15A/H
Dimensions300 × 400 × 150 mm
Weight10 kg
Protection ClassIP 65
Ambient Temperature0 ~ +60 ℃

Sensor

Minimum Mould Size180 × 100 × 55 mm
Storage Temperature0 ~ 60 ℃
Cable Ambient Temperature≤ 180 ℃
Connector Ambient Temperature≤ 125 ℃
Hydraulic Hose Temperature≤ 100 ℃
Sensor Weightapprox. 10 kg (single sensor incl. cable)
Sensor Cover Weightapprox. 19 kg
Cable Length≤ 15 m
Protection ClassSensor IP56, connector IP65
Relative Humidity100%
Applications

Dedicated to Mould Level Measurement for Metallurgical Continuous Casters

Slab Caster Billet Caster Round Billet Caster Mould Level Control Tundish Level Continuous Casting Automation Steelmaking Plant Caster Shop

ADDRESS

Room 801, Building 05, Jingtian West, Futian District, Shenzhen City

EMAIL

YCL5466@163.com

PHONE

0755-83900500
13714005876

Copyright © Shenzhen Lankel Automation Equipment Co., Ltd.
粤ICP备20070288号-1